Troubleshooting Common Stove Issues

Even when you do everything right, there are times when your stove doesn’t behave as expected. Most problems are simple and easy to solve once you know what to look for.

Smoke spilling into the room

The usual causes:

  • Cold plug – on freezing mornings, cold air gets trapped in the flue and pushes smoke back down.
  • Wet logs – green or damp wood creates more smoke than heat.
  • Vents closed too soon – fire stalls before the chimney is warmed through.
  • Overloaded firebox – too much wood at once restricts airflow.
  • Flue needs sweeping – soot or tar blocking the draw. If we’ve installed the stove, it’s very unlikely that you’ll have a bird’s nest blocking the flue.

Fixes:

  • Preheat the flue – light a rolled-up newspaper or use the top-down method.
  • Use only seasoned or kiln-dried wood.
  • Leave vents fully open until flames are strong.
  • Book a sweep if it’s been more than a year (or sooner if you burn a lot).

 

More information: 

Blackened glass

Why it happens:

  • Insufficient air supply.
  • Damp wood creating heavy smoke.
  • Closing vents right down to “save fuel” (it doesn’t – it just creates tar).

Fixes:

  • Keep vents fully open so air washes across the glass
  • Burn fiercely for 30+ minutes – this will clear the carbon deposits from the glass.
  • Burn dry logs only.
  • Clean with stove glass cleaner or damp newspaper dipped in ash.

 

For more advice on how to keep your glass clear – click here.

Poor heat output

The usual causes:

  • Logs aren’t seasoned enough – energy is wasted drying them out.
  • Stove overloaded or packed too tightly.
  • Flue draught not strong enough.

Fixes:

  • Switch to kiln-dried logs for a hotter burn.
  • Load fewer, well-spaced logs.
  • If the stove never seems to get hot, ask us about fitting a flue extension or vent.

 

For more advice on day-to-day use, click here.

Excess soot or tar (creosote)

Why it happens:

  • Burning wet fuel.
  • Running stove at a low, smouldering burn.
  • Overnight burning.
  • Mixing smokeless fuel and wood together.

Fixes:

  • Always aim for visible flames.
  • Sweep at least once a year (more if you burn daily).
  • Stick to one type of fuel at a time (don’t burn smokeless fuel!).

Strange smells or paint smoke

  • Normal during the first few burns – this is the stove paint curing.
  • Keep windows open for ventilation.
  • Smell should fade after 7–10 fires.

 

How to cure your fire – find out more here.

When to call us

If problems keep coming back despite following the basics, it’s worth booking a sweep and service. A trained eye can quickly spot if seals, bricks, or draught issues are behind the trouble.

 

Contact us here.

Quick checklist

  • Smoke in room? Cold plug, wet logs, or vents closed too soon.
  • Black glass? Open the vents, burn drier wood.
  • No heat? Use kiln dried, space logs properly.
  • Excess soot/tar? Burn hotter, sweep annually.
  • Persistent issues? Book a sweep and service.