Installations

From flexible liners to full twin wall systems – we fit stoves safely, neatly, and HETAS certify every installation.

We’ve fitted hundreds of stoves across the South West, so whatever your home needs – we’ve got it covered.


Whether you’ve got a chimney or not, we’ll design and install the right flue system. That could be a flexible liner in an existing chimney, an internal twin wall system, or an external setup.

2 Flue Systems – 4 Types of Installation

We work with two flue systems: flexible liners and rigid twin wall.

No chimney? No problem. Whatever your property, we’ve got an installation method that works.

Flexible Flue Liner

If you already have a chimney, we install a flexible stainless steel liner inside it. This creates a safe, efficient flue that brings your old chimney up to modern standards.

Twin – Internal

When there’s no chimney, an insulated twin wall flue can be built up through the inside of your home and out through the roof. It’s safe, efficient, and keeps everything neat indoors.

Twin – External

If you’d rather not run a flue through your house, an external twin wall system is fixed to the outside wall and taken up past the roofline. A practical solution with minimal disruption inside.

Flex-to-Twin

In some homes, the chimney stops short in the loft. In these cases, we combine a flexible liner inside the chimney with a twin wall system above – giving you the best of both.

Not Sure What You Need? Your Twin Wall Options

Not everyone knows what system they need – and that’s fine. If you don’t have a full chimney, or if yours stops short in the loft, we’ll guide you through the right setup.
Twin wall flue systems can be built in three ways – internal, external, or hybrid (flex-to-twin). Each one gives you a safe, HETAS-certified stove installation, whatever your property.

Safe, Certified, and Tidy

All our installations meet Building Regulations and are HETAS certified – so you know they’re safe, compliant, and built to last. We work cleanly, protect your property, and keep disruption to a minimum.

Official HETAS Registered Installer logo used by Blazing Burners

What we need to get started

Contact Details – Full name, phone number, address & postcode.

Directions – For hard to find addresses, a description or What3Words helps us find you.

Photos – We want to see your fireplace/room and we want to see how we’re going to get on your roof and how much flue we will need.

Your journey - How we work

We’ll guide you through every step of the journey – from your first enquiry and the details we gather, to getting your room ready, carrying out the installation, and looking after you with our aftercare and yearly servicing.

Interested in an installation…