Day-to-Day Use and Cleaning

Once your stove is cured and ready for normal use, it’s all about building good habits. These small things make your stove easier to live with, keep it efficient, and stop you from running into problems later.

Lighting the fire

The quickest way to get your stove going is to heat the flue fast. If the chimney isn’t warm, smoke can stall and spill into the room.

Two reliable methods:

  • Bottom-up (traditional)
    Kindling and firelighters at the base, logs on top. Works fine but can be slower to warm the flue.
  • Top-down (our favourite)
    Logs at the bottom, kindling and firelighter on top. The fire burns down through the stack, heating the flue faster and giving you less smoke at start-up.

Tip: within 5 minutes your stove should be burning strongly. If it’s still struggling, check your logs aren’t damp.

 

Head to our dedicated post on how to light your fire.

Using the air vents

Air controls regulate how your stove runs.

  • Starting or refuelling → open vents fully.
  • Once logs are burning well → close vents slightly to maintain a steady flame.
  • Going to bed or leaving the house → leave vents cracked open for a clean burn (never shut completely).

Golden rule: always aim for visible flames. A smouldering fire doesn’t save fuel – it makes tar, soot, and dirty glass.

 

Head to our dedicated post on using the controls.

Keeping the glass clean

Stove glass will blacken if the fire isn’t burning cleanly.

  • Use dry, seasoned or kiln-dried logs.
  • Keep vents slightly open so air can wash across the glass.
  • Don’t overload the fire – too much wood chokes it.
  • If the glass does blacken, clean with stove glass cleaner, or use the old trick: damp newspaper dipped in ash.

Head to our dedicated post on keeping your glass clean.

Managing ash

Ash isn’t waste – a thin bed actually helps insulate the fire and makes lighting easier.

  • Leave a layer of 1–2cm.
  • Empty out once the ash builds too high.
  • Use a metal bucket with a lid – ash can stay hot for days.
  • Never put hot ash in bins or on compost. Fire risk.

 

Head to our dedicated post on managing ash.

Choosing and storing logs

  • Only burn seasoned or kiln-dried wood.
  • Store under cover, off the ground, with good airflow.
  • Bring logs inside a day before use to warm and dry them further.
  • Keep eco-logs completely dry – even a splash of damp will ruin them.

 

Head to our dedicated posts on:

Weekly checks

It’s worth a quick routine each week during the burning season:

  • Check your CO alarm is working.
  • Empty excess ash.
  • Check vents and handles move freely.
  • Wipe the glass.
  • Glance up at your log store – make sure you’re stocked for the week ahead.

Quick checklist

  • Light with the top-down method for a faster, cleaner start.
  • Always burn with visible flames.
  • Leave a thin layer of ash but don’t let it build up.
  • Use seasoned or kiln-dried logs only.
  • Clean glass regularly – easier little and often.