Victorian Fireplaces – Stoves That Fit

Fitting Stoves into Victorian Tiled & Cast-Iron Fireplaces

Salamander Hobbit SE stove installed into a tiled small fireplace in Perranporth by Blazing Burners

Period homes often still have their Victorian tiled & cast-iron fireplaces with ornate surrounds and tiled inserts. These are beautiful features that many customers want to keep – and in most cases, it’s possible to fit a stove into them.

The Conversion Process

Keep the Surround
  • The tiles and cast iron surround are non-combustible, so they can safely remain in place.
  • This preserves the original character and style of the fireplace.
Hearth
  • If the existing hearth is too small, raised, damaged, or made from unsuitable material, we can install a new one. Options include slate or granite slabs, tiled finishes (plain or decorative), or pre-formed hearths.
  • Because the recess is such a tight fit, we normally concrete the back area (inside the chamber) to give the stove a flat, level surface to sit on.
  • To comply with regulations, the hearth must project at least 30cm in front of the stove door and 15cm to each side. Where needed, we extend or re-finish the hearth so it meets these requirements while blending into the room’s style.
  • In most Victorian fireplaces, the hearth in front of the cast iron surround is already tiled or slate. These are usually fit for purpose and can be kept in place – helping preserve the original character of the fireplace.
Remove the Fireback
  • The angled fireback used for open fires takes up depth inside the recess.
  • We break it out, clear the rubble (typically 10–15 bags), and prepare the chamber.
  • The recess is then finished with a fireproof render – this helps bind the walls together and keeps dust and debris intact, leaving a clean and durable surface for the stove. The render can be left plain, or in some cases finished with paint to match the room. Tiling isn’t always an option in tight fireplaces, as the space is already limited.
Fit a Compact Stove
  • Only narrow stoves (around 35cm wide) will fit these openings.
  • The stove connects via a vitreous T-piece to a flexible stainless-steel liner running up the chimney.
  • The T-piece stove pipe connects to the back of the stove – this means that the stove is brought forward of the fireplace so that more air is allowed around the stove. This prevents complications created by poor draw such as smoke spillage.
  • The design ensures a neat, safe, and fully compliant installation.
 
Performance Expectations
  • In tall Victorian rooms (often 3m+ ceilings), it can take a couple of hours for the warmth to fill the space.
  • Compact stoves are rated at ~4kW, but in practice, we’ve found that they can safely deliver 5–7.5kW once they’re running steadily, since they’ll be fed with enough fuel (1.5 small logs) to support this.
  • Once up to temperature, the stove provides steady, comfortable heat without overpowering the room.

 

 

a purple tiled fireplace that is being prepared for a hobbit stove installation in Perranporth
The fireback of an open fire is being removed so that a salamder hobbit se stove can be fitted
an open fire with a cast iron surround ready to be converted to accommodate a wood burning stove in Cornwall
Salamander Hobbit SE stove with a fire in use in Falmouth
Salamander Hobbit SE 4kW stove fitted into a black cast iron Victorian fireplace in Cornwall
Hobbit stove in Perranporth installed into a tiled fireplace

Stove Options

We typically recommend two proven models:

  • Salamander Hobbit SE – traditional design, compact, DEFRA-approved and Ecodesign-ready.
  • Ekol Apple Pie – same size but a quirky, modern look with more customisation. 

 

Stove Specs
  • Both are around 30cm wide x 46cm tall – designed for small openings.
  • Clean burning & efficient:
    • DEFRA approved
    • Eco-compliant
  • Hobbit: RRP £865
  • Apple Pie: RRP £999
  • Upgrades available on both models including colour changes from the standard black model
Supplier stock photo of the Salamander Hobbit SE stove, shown as a product option for stove installations by Blazing Burners
The "Hobbit"
Supplier stock photo of the Ekol ApplePie Core stove with cream-coloured door, used for stove installation options by Blazing Burners
The "Apple Pie"

An Alternative Option

If you’d prefer a wider choice of stoves and higher heat outputs, the fireplaces can be removed and the chamber fully opened up.

Find out more in our “Fireplaces” section.

The knockout of a fireplace and creating a larger opening with lots of rubble - Newquay
A new fireplace with a granite lintel and rustic render finish in Newquay
new fireplace in Newquay with a rustic render finish, thick slate chunky hearth and granite lintel

Typical Costs

Every fireplace is different, but these figures give a good idea of what to expect.

Hobbit fireplace full installation

Cost: ~ £3,000

 

Apple Pie fireplace full installation

Cost: ~ £3,200

 

Breakdown:

  • £820–£1,000: Stove
  • £1,650 – £1,900: Flexible liner installation
  • + £500: Remedial work – knockout (no lintel), rubble removal, making good/render
 

Alternative Option: Medium/Large fireplace full installation

Cost: £3,500 – £5,000

Breakdown: 

  • £550–£1,000: Stove
  • £1,650 – £1,900: Flexible liner installation
  • + £1,300: Remedial work – knockout, rubble removal, hearth, making good (render & plaster)
 

What’s Included in all scenarios

  • Stove – Model varies
  • Fireplace remodel – fireback removal, rubble removal, chamber render
  • HETAS-registered flexible flue liner installation – 316L grade, suitable for wood-burning
  • Chimney sweep – 30-minute rotary power sweep
  • CO alarm, chimney notice plate, commissioning, testing & certification
  • Labour & VAT – all works and compliance included
  •  

Interested in knowing more...

Want to keep your Victorian fireplace and enjoy the warmth of a stove?
Contact us today – we’ll guide you through the best options for your home.