Flex to Twin Wall (Hybrid flue) - What’s Included (and What’s Not)

No smoke and mirrors – here’s exactly what’s included in a flex-to-twin hybrid installation (and what isn’t).

Some chimneys don’t reach full height or stop in the loft. In these cases we use a flexible liner up to the end of the masonry, then transition to a twin wall flue to complete the run. The essentials are always included, and anything outside of scope is flagged before we go ahead.

Flex-Twin Inclusions and Exclusions

Every flex-to-twin hybrid installation comes with:

  • Full sweep and flue blockage removal (up to 30 minutes)

  • Stove connection and closure plate (fireplace)

  • Flexible flue liner (Dura Flue 316L – wood-burning only) up to termination point in loft/roof space

  • Flex-to-twin adapter (to connect liner to twin wall system)

  • Twin wall flue system (chrome/stainless in loft/hidden, black outside if external)

  • Straight lengths, locking bands, and wide locking bands

  • Flashing and storm collar (roof exit)

  • Rain & bird guard cowl

  • CO alarm

  • Chimney notice plate

  • Commissioning, testing, and HETAS certification

  • Labour

  • VAT

 

May also be required (depending on layout):

  • Extra supports (if extended twin wall length is needed above roof)

  • Mesh protection of the flue in the loft

  • Rafter support (depending on termination point)

 

Not included (quoted separately if required):

  • Stove

  • Hearth

  • Ventilation (may be required for additional air supply)

  • Heat shield (may be required to protect combustible walls)

  • Twin wall bends (charged separately – typically £180 per pair)

  • Additional site visits (call-out fee and hourly rate)

Our aim is to keep every job clear and predictable – everything listed here is included, and if anything extra comes up, we’ll talk it through before we do it.