The brackets that keep your chimney standing strong.
Every twin wall system needs supports. From base plates to wall bands and rafter brackets, here’s how many you’ll need and where they go.
Twin Wall Supports - How Many Do You Need?
A twin wall flue isn’t just lengths of pipe – it needs proper support all the way up. Supports keep the system safe, stable, and compliant with Building Regulations. How many you need depends on the type of installation and the height of the run.
Types of Supports
Base Support Unit – carries the main weight of the system at ground level or at the stove connection.
Wall Brackets – fix the flue securely to the building, usually every 2m on external systems.
Attic / Rafter Supports – used internally, typically one per floor and two in the loft for a two-storey house.
Wide Locking Bands – join flue sections together but also act as supports, keeping the system rigid.
Rigid Arm Bracing – anything over 2.5m above the last support will need extra bracing or guying. In practice, we’ll usually brace before reaching that height to keep the system solid and stable in all conditions.
Typical Setups
Bungalows (internal run): usually 2 rafter/roof supports in the loft.
Two-storey houses (internal run): 2–3 supports (1 on the first floor, 2 in the loft).
External flues (two-storey): 1 base support unit + typically 2 wall bracket supports.
Tall systems: anything over 2.5m above the last support will need extra bracing or guying. In practice, we’ll usually brace before reaching that height to keep the system solid and stable in all conditions.
Installer’s Note
Supports aren’t optional – they’re what make the whole system safe and long-lasting. We always design support spacing into the estimate so you know exactly what’s included.
Need advice on your setup?
The number of supports depends on your property layout and the total height of the flue. Send us a few photos and we’ll work it out for you – then give you a clear, all-in estimate.