Flex to Twin Wall (Hybrid flue) - What’s Included (and What’s Not)
No smoke and mirrors – here’s exactly what’s included in a flex-to-twin hybrid installation (and what isn’t).
Some chimneys don’t reach full height or stop in the loft. In these cases we use a flexible liner up to the end of the masonry, then transition to a twin wall flue to complete the run. The essentials are always included, and anything outside of scope is flagged before we go ahead.
Flex-Twin Inclusions and Exclusions
Every flex-to-twin hybrid installation comes with:
Full sweep and flue blockage removal (up to 30 minutes)
Stove connection and closure plate (fireplace)
Flexible flue liner (Dura Flue 316L – wood-burning only) up to termination point in loft/roof space
Flex-to-twin adapter (to connect liner to twin wall system)
Twin wall flue system (chrome/stainless in loft/hidden, black outside if external)
Straight lengths, locking bands, and wide locking bands
Flashing and storm collar (roof exit)
Rain & bird guard cowl
CO alarm
Chimney notice plate
Commissioning, testing, and HETAS certification
Labour
VAT
May also be required (depending on layout):
Extra supports (if extended twin wall length is needed above roof)
Mesh protection of the flue in the loft
Rafter support (depending on termination point)
Not included (quoted separately if required):
Stove
Hearth
Ventilation (may be required for additional air supply)
Heat shield (may be required to protect combustible walls)
Twin wall bends (charged separately – typically £180 per pair)
Additional site visits (call-out fee and hourly rate)
Our aim is to keep every job clear and predictable – everything listed here is included, and if anything extra comes up, we’ll talk it through before we do it.