5” or 6” Diameter Flues?
Choosing between a 5” or 6” flue might sound minor, but in practice it can make or break an installation.
From flexible liners in masonry chimneys to twin wall systems, that small difference in size often has a big impact.
The 5” vs 6” Decision – Small Difference, Big Consequences
Whether you’re relining a masonry chimney or running a twin wall system, the choice between a 5″ or 6″ flue matters more than you might think. That 20mm difference (195mm vs 215mm on twin wall) can be the deciding factor in older properties, where joists are tighter or less predictable.
When installing a stove into an existing chimney, we always reline it with a flexible flue liner to ensure safe and efficient operation. Most stoves in the UK are designed to work with either a 5” or 6” flue. The correct size is always set by the stove manufacturer, so it’s essential to choose a stove that matches your flue. Please don’t buy a stove without speaking to your installer first – stove shops (especially online sellers) are focused on selling products, but it’s the installer who has to physically get your liner down your chimney.
The difference between a 5” and 6” liner may not sound like much, but it can be the difference between a straightforward installation and one that requires extra labour, materials, and cost. Sometimes blockages need clearing, or sections of masonry must be removed to allow a wider liner through. In other cases, we may need to trim joists or structural timbers to make space – and then “make good” afterwards with additional carpentry and finishing. All of this is possible, but it means more time, cost, and disruption compared with a 5” system that drops in cleanly.
5” Diameter Flues – The Preferred Choice (Where Suitable)
Wherever possible – particularly where we can’t fully inspect the chimney from top to bottom – we recommend stoves that are approved for use with a 5” liner. Camera surveys are available, but they can be misleading. A scan might suggest a blockage or tight spot, when in practice our rods and brushes can often clear it, or we use the right technique to guide the liner through. We’ve successfully fitted liners in flues where other installers have walked away. Fortunately, many excellent stoves are designed for 5” systems, covering every size, style, and heat output. Whether you want a compact model for a snug room or a more powerful stove for a larger space, there are plenty of options.
Benefits of a 5” Flexible Flue Liner
- Easier installation in older chimneys– The slimmer profile makes it more flexible and better able to navigate bends, offsets, or restricted spaces.
- Less structural work required– A 5” liner often avoids the need to break into chimney breasts, remove bricks/stones, or cut back timbers and joists. Where masonry does have to be opened up, it also avoids the extra work of “making good” afterwards – replastering walls, refitting finishes, or restoring ceilings.
- Improved efficiency– With compatible stoves, a 5” liner can maintain better draft. Oversized liners can slow gases, leading to poor draw, smoke spillage, or condensation.
Condition of Existing Flues
Many older chimneys have endured decades of use. Thousands of fires, combined with harsh sweeping methods in the past, have left their mark – mortar joints soften, surfaces become uneven, and loose masonry or ledges are common. The key issue this creates is blockage potential. Rubble or debris can obstruct the liner’s path, or fall into the flue later and restrict the passage of gases.
Installing a flexible liner solves this by creating a smooth, continuous passage for smoke and gases, bypassing the compromised structure of the chimney and greatly reducing the risk of future blockages.
Regulations
UK Building Regulations are clear: most wood-burning stoves require a 6” liner unless the stove is DEFRA-approved and the manufacturer specifically permits a 5”. Only in those cases can we legally install a 5” liner. Anything smaller, or non-compliant, risks safety issues, non-certification, and refusal of sign-off by a HETAS installer or building inspector.
Summary - Why We Recommend 5” (Where Suitable)
For many older properties, a 5” liner is the smarter choice – easier to install, less disruptive, and more efficient when matched with the right stove. In fact, it can save significant cost – and in some cases, it’s the difference between a successful installation and one that isn’t possible at all.